1. "Investigation of Optimum Process Parameters on the Sheet Hydroforming of Titanium, Aluminum Clad Metal for Battery Housing", H-C Tseng, Z-C. Wu, C Hung, M-H. Lee, C-C. Huang, 4th International Conference on Tube Hydroforming (TUBEHYDRO 2009), September 6-9, Kaohsiung, Taiwan。
2. "八克高壓鋼瓶 O-ring 封口之有限元素分析與尺寸最佳化" (Improving the O-ring Sealing of 8 gram Charger by Finite Element Analysis and Shape Optimization), 蔡正一, 國立交通大學機械系碩士論文, 2010 年 6 月。
3. "八克高壓鋼瓶 O-ring 封口之有限元素分析與尺寸最佳化" (Improving the O-ring Sealing of 8 gram Charger by Finite Element Analysis and Shape Optimization), 洪景華, 蔡正一, 中國機械工程學會第二十七屆全國學術研討會, 2010 年 12 月,台灣, 台北。
4. "Numerical Design Optimization of the Ejector Mixer with CFD Simulation", S-Y. Chen, Y-D. Kuan, S-M. Lee, J-Y Chang, J-T. Lin, T-S. Lin,,2010 CFD Taiwan。
5. "非球面玻璃透鏡模造成形之模仁形狀補償與玻璃殘留應力探討" (Mold Shape Compensation and Residual Stress Analysis in Molding Process of Aspherical Glass Lenes), 蘇志豪, 國立交通大學機械系碩士論文, 2012年7月。
6. "超音波振動系統在高溫下之最佳化設計"(Optimum Design on Ultrasonic Vibration System with. Elevated Temperatures), 吳文玉,國立交通大學機械系碩士論文,2013年7月。
7. "非球面玻璃透鏡模造成形之模仁形狀補償與玻璃殘留應力探討" (Mold Shape Compensation and Residual Stress Analysis in Molding Process of Aspherical Glass Lenes), 蘇志豪, 國立交通大學機械系碩士論文, 2012年7月。
8. "垂直軸風力抽水機研製與其複合材料葉片最佳化設計"(Optimal Design of Composite Wind Blades of A VAWT for Water Pumping), 姚旻亨, 國立交通大學機械系碩士論文, 2014年8月。
18. "工具機主軸頭結構熱變形分析與多重物理耦合最佳化模擬研究 (A study of the thermal deformation and multiphysics optimization of a machine tool spindle head)" (上銀論文獎), 洪名杰 (Ming-Chieh Hung), 國立中興大學機械系碩士論文,2015。
19. "Evaluation of the Mechanical Behavior and Material Properties of Native and Tissue-engineered Cartilage Using Finite Element Analysis and Ultrasonic Elastography Measurement", C.-Y. Chung, Doctoral Thesis, Case Western Reserve University, Cleveland, USA, Jan. 2015。
20. "DESIGN OPTIMIZATION AND AUTOMATION OF METAL AND COMPOSITE BIKE FRAME", C-T Chang, Y-C Huang, S-Y. Chen,a-7801 2015 SAMPE Baltimore。
21. "Determination of poroelastic properties of cartilage using constrained optimization coupled with finite element analysis", C.-Y. Chung, Joseph M. Mansour, Journal of the Mechanical Behavior of Biomedical Materials, Vol.42, pp. 10-18. ,2015。
32. "國產三軸立式加工中心機主軸頭暫態熱流固耦合分析優化與實機驗證 (A thermal-fluid-structural multi-physics transient analysis, optimization and experiemntal study of a 3-axis vertical machining center spindle head)", 劉家安 (Chia-An Liu), 國立中興大學機械系碩士論文, 2016。
33. "應用梯度演算法最佳化光學鏡片模具之異型水路設計 (Optimization of conformal cooling channels in optical-lens molds by gradient-based algorithm)",張柏揚,鍾禎元, 第十三屆先進成型與材料加工技術國際研討會,2016,中國湖南。
34. "Design and Analysis on Mirror Lightweighting for a Spaceborne Remote Sensing Instrument" ,Chia-Yen Chan, Bo-Kai Huang, Ting-Ming Huang, Yi-Cheng Chen, and Fong-Zhi Chen, Terrestrial, Atmospheric and Oceanic Sciences, March 2016。
35. "Mirrors Design, Analysis and Experimental Model Manufacturing of 550mm Korsch Telescope" ,Po-Hsuan Huang and Bo-Kai Huang,, Remote Sensing Satellite Technology Workshop, Nov 2016。
46. "Optimization of lightweight structure and supporting bipod flexure for a space mirror" ,Yi-Cheng Chen, Bo-Kai Huang, Zhen-Ting You, Chia-Yen Chan, and Ting-Ming Huang, Applied Optics, Dec 2016。
47. "應用基因演算法進行水平軸風力機性能之最佳化" (Optimize the performance of horizontal-axis wind turbine with adapting genetic algorithm)(上銀論文獎), 鍾國緯,清華大學動力機械系碩士論文,2016年。
48. "Optimization of lightweight structure and supporting bipod flexure for a space mirror", Y-C.CHEN, B-K.HUANG,Z-T.YOU, C-Y.CHAN,T-M.HUANG, Vol. 55, No. 36 , Applied Optics, December 20 2016。
49. "Mirror Lightweight design and analysis for a Space borne remote sensing instrument", Chia-Yen Chan, Bo-Kai Huang, Ting-Ming Huang, Yi-Cheng Chen, Fong-Zhi Chen,Terrestrial, Atmospheric and Oceanic Sciences, Jan 2017。
50. "軸流扇葉之參數化建模與性能分析(Modeling and Performance Analysis of Axial-type Fan)", 劉陽光, 陳申岳, 黃彥智, 冷凍空調&能源科技, 103期pp17~27, 2017。
52. 熱電發電系統之研究:最佳化發電及振盪邊界條件之影響”(Investigation of a Thermoelectric Generation System: Optimal Power Output and the Effect of Oscillating Boundary Condition),黃士容,國立成功大學航空太空工程學系碩士論文,2015。
53.“磁條卡讀卡機磁頭彈片之最佳化研究”(The Finite Element Analysis and Shape Optimization on Spring of Magnetic Card Reader Head),張佑傑,國立交通大學機械工程系所碩士論文,2015。